Lahnsattel (Pass)
KlimCategorie 3

Lahnsattel (Pass)

A measured category 3 pass in AT: 9.2 km at 3.87%, with enough double-digit sting to punish poor pacing.

Lengte
9.2km
Gem.
3.9%
Max
10.1%
Top
962m
Hoogtewinst
321m
Plan hier een routeVooraf getekend van voet tot top, klaar om aan je rit toe te voegen.

De klim

Hoogteprofiel

934 m 613 m 0.0 km2.3 km4.6 km6.9 km9.2 km
+321 m stijging−0 m dalingMax. helling 10.1%

Lahnsattel (Pass) cycling climb profile

Lahnsattel (Pass) is a category 3 climb in AT that looks manageable on paper but still needs respect. The headline number is 9.2 km at an average gradient of 3.87%, rising from 606 m to 962 m for 356 m of net elevation gain. That makes it more of a rhythm climb than a pure steep-wall effort, but the 10.1% maximum gradient changes how it should be ridden.

The key point is the gap between the average gradient and the maximum gradient. A climb averaging 3.87% over 9.2 km is not asking for constant threshold pressure from the bottom. But a ramp touching 10.1% means the profile is not completely even. There are likely easier sections that pull the average down, combined with sharper pitches where momentum and gearing matter. Ride it as a long aerobic climb with interruptions, not as a short punchy ascent.

How the gradient unfolds

Without a detailed kilometre-by-kilometre breakdown, the safest reading is to treat the lower average as the controlling feature and the maximum gradient as the tactical risk. The climb gains 356 m from start to summit, so the work accumulates steadily rather than brutally. The danger is not the total elevation gain. The danger is letting the easier gradients convince you to ride above sustainable pace before the steeper ramps arrive.

On the gentler sections, the fastest riders will keep pressure on the pedals and carry speed. For most riders, the better approach is to stay just below hard climbing intensity and avoid surging every time the road tips up. The 10.1% maximum is enough to force a real torque demand, especially if it comes after several kilometres of steady climbing.

Pacing and gearing notes

Use the first part of the climb to settle into a controlled effort. If you ride by power, keep the opening kilometres below your /glossary/ftp rather than chasing speed. The average gradient is shallow enough that over-pacing can feel harmless early, but the final cost usually shows up when the road bites.

Gearing should be chosen for the maximum gradient, not the average. A setup that feels comfortable at 3.87% can become too heavy on a 10.1% ramp, especially if you are already carrying fatigue. Aim for a cadence you can preserve when the gradient kicks rather than grinding through the steepest section and spiking effort.

The best ride here is patient and even. Let the 9.2 km length shape the pacing, let the 10.1% maximum shape the gearing, and save the real pressure for the upper part of the climb once the summit at 962 m is within reach.

Deze al gereden? Zet je tijd ertegenover.

Neverchill registreert elke klim die je rijdt, houdt je beste beklimmingen bij en laat zien hoe je scoort op de klimmen waar je steeds naar teruggaat.

Maak een gratis account aan