Paso de Pircas
AscensionHors Catégorie

Paso de Pircas

A data-led guide to Paso de Pircas, an HC climb in Chile with 28.4 km of sustained climbing and severe ramps up to 18.16%.

Longueur
28.4km
Moy
5.8%
Max
18.2%
Sommet
3,230m
Dénivelé
1,700m
Planifie un itinéraire iciBase au sommet déjà tracée, prête à intégrer à ta sortie.

L'ascension

Profil de la pente

3192 m 1581 m 0.0 km7.1 km14.2 km21.3 km28.4 km
+1700 m montée−88 m descentePente max 18.2%

Paso de Pircas cycling climb profile

Paso de Pircas is an HC climb in Chile that demands patience more than aggression. The headline is 28.4 km at an average gradient of 5.84%, but the more useful number is the vertical load: 1,657 m of net elevation gain from a start elevation of 1,573 m to a summit elevation of 3,230 m.

That combination tells you this is not a short power climb where you can ride on sensation and survive the damage later. It is long enough, high enough, and steep enough in places to punish early overpacing. The average gradient looks manageable on paper, but the maximum gradient of 18.16% changes the way the climb should be ridden.

How the gradient unfolds

The available profile data does not break the climb into named sectors, so the honest reading is macro-level: Paso de Pircas is a long, mostly sustained ascent with steep interruptions rather than a climb defined by a single brutal wall.

The total ascent is 1,700 m against 1,657 m of net elevation gain, which points to a route where most of the work is true upward progress. In practical terms, there is not much reason to expect meaningful recovery simply because the average is below 6%. You should treat the climb as continuous load from bottom to summit.

The key trap is the contrast between the 5.84% average and the 18.16% maximum. A climb can feel controlled for long stretches at that average, then suddenly force a very different effort when the road pitches up. Those ramps are where riders who have been sitting slightly above sustainable pace start paying interest.

Pacing and gearing notes

Ride Paso de Pircas like an endurance climb with anaerobic interruptions. The first priority is keeping the early effort below threshold rather than chasing speed on the lower slopes. If you are using power, anchor the ride around your sustainable climbing range rather than the speed implied by the average gradient. For a refresher on how to set that ceiling, see /glossary/ftp.

Gearing should be chosen for the maximum gradient, not the average. A setup that feels fine at 5.84% can become costly when the road reaches 18.16%, especially after sustained climbing and significant elevation gain. The goal is to keep cadence from collapsing on the steepest pitches without having to surge far above threshold.

The summit at 3,230 m also matters. Even without adding assumptions beyond the profile, the climb finishes substantially higher than it starts, so pacing discipline becomes more important late. If the lower slopes feel too easy, that is not a signal to lift the effort. It is the exact moment to save matches for the steeper ramps and the final accumulation of fatigue.

The best strategy is simple: start controlled, keep torque manageable, avoid responding to every change in gradient, and arrive at the upper slopes with enough aerobic margin to handle the steepest sections cleanly.

Tu l'as déjà grimpé ? Compare ton temps.

NeverChill enregistre chaque montée que tu grimpes, suit tes meilleures ascensions et te montre où tu te situes sur celles que tu retrouves souvent.

Créer un compte gratuit