Luther Pass
ClimbCategory 3

Luther Pass

A high-altitude Category 3 climb in the US covering 7.9 km with 375 m of net gain but 505 m of total ascent, demanding careful pacing over undulating terrain.

Length
7.9km
Avg
4.7%
Max
14.9%
Summit
2,377m
Ascent
505m
Plan a route here Pre-drawn base to summit, ready to extend into your ride.

The climb

Gradient profile

2383 m 2037 m 0.0 km2.0 km4.0 km5.9 km7.9 km
+357 m ascent−20 m descentMax grade 11.8%

Overview

Luther Pass is a Category 3 climb in the US, running 7.9 km from an already high 2,002 m at its base to a summit of 2,377 m. Over that distance you gain 375 m of net elevation, which places it firmly in the moderate bracket on paper. The starting elevation alone is worth respecting: everything here happens well above 2,000 m, where thinner air trims the power you can hold.

The number that reshapes this climb is the gap between net gain and total ascent. You climb 375 m in net terms, but the road actually forces 505 m of ascent on you — 130 m of that is gained back after intervening descents. That undulation means the climb is not a single steady drag; you pay for extra height, lose some, and pay for it again. Expect the effort to feel harder than the 375 m headline suggests.

How the Gradient Unfolds

The 4.73% average is a blend, not a constant. With 130 m of hidden re-climbing folded in, the average smooths over both easy stretches and sharp kicks. The steepest ramp reaches 14.94%, more than three times the average, so there is real punch hiding in an otherwise moderate profile.

  • Flatter and downhill recovery sections where the road gives back roughly 130 m of height
  • Repeated short climbs that reset your legs each time you crest and drop
  • A steepest ramp near 14.94% that demands a gear in reserve

Pacing Notes

On a smooth climb you would ride even-effort and let speed float. Luther Pass punishes that plan because the descents tempt you to coast and the kicks tempt you to surge. Aim for even effort on the climbing pitches, hold your sustainable power output rather than chasing a fixed speed, and soft-pedal the descents to recover instead of hammering them. If you do not know your ceiling, run the FTP estimator first so you have a target watt number before the road pitches up. At this altitude, going over threshold early is expensive and slow to recover from.

Gearing

The 14.94% maximum gradient governs your setup. Gear for that ramp, not the 4.73% average. A compact or sub-compact chainset paired with a wide-range cassette — a 34×32 or 34×34 — gives you the low end to spin the steep pitch without grinding to a stall at altitude. Check your chainset and cassette before the ride; discovering you are under-geared on a near-15% wall is not the moment to find out.

Summary

  • Length: 7.9 km
  • Average gradient: 4.73%
  • Maximum gradient: 14.94%
  • Net elevation gain: 375 m
  • Total ascent: 505 m
  • Category: 3

Luther Pass rewards riders who read past the average. Pace the pitches on effort, spin the descents, gear for the steep ramp, and the 505 m of real ascent becomes manageable rather than punishing.