Pass of Piedrasluengas
ClimbCategory 2

Pass of Piedrasluengas

An 11 km Cat 2 climb in northern Spain with 627 m of net gain, a 5.72% average gradient, and a brutal 28.27% maximum ramp that demands careful pacing from the start.

Length
11km
Avg
5.7%
Max
28.3%
Summit
1,348m
Ascent
1,183m
Plan a route here Pre-drawn base to summit, ready to extend into your ride.

The climb

Gradient profile

1349 m 764 m 0.0 km2.7 km5.5 km8.2 km11.0 km
+625 m ascent−40 m descentMax grade 11.7%

Overview

The Pass of Piedrasluengas sits in northern Spain and earns its Category 2 rating through a combination of sustained length and unpredictable gradient spikes. At 11 km from base to summit, with a net elevation gain of 627 m and an average gradient of 5.72%, the numbers look manageable on paper. The 28.27% maximum gradient tells a very different story.

Total ascent across the climb reaches 1,183 m — considerably more than the 627 m net figure. That gap signals repeated gradient surges and small undulations rather than a clean, linear ramp. Riders who pace purely to the average will be caught off-guard.

How the Gradient Unfolds

The climb begins at 721 m elevation. The early kilometres tend to lull riders into a false sense of security: the 5.72% average is achievable at a steady tempo, and the road gives little immediate warning of what lies ahead.

As the climb progresses toward the 1,348 m summit, sections ramp sharply beyond any comfortable cadence zone. The 28.27% maximum is not a brief kicker — gradient jumps of that severity require full commitment of gearing and body position. The difference between the net gain (627 m) and total ascent (1,183 m) confirms the climb does not simply go up in one smooth arc; expect sections where the road briefly eases or dips before pitching up again, resetting fatigue accumulation each time.

Pacing Notes

The temptation on a Cat 2 climb with a sub-6% average is to push above threshold early. Resist it. The severe maximum gradient means you need FTP-based reserves for the steep ramps. If you don't know your current FTP, use the FTP estimator before attempting a structured effort here.

  • Target power: Hold 75–85% of FTP on the moderate sections. Do not attack the early kilometres.
  • Gradient spikes: When the road hits double-digit gradients — and especially approaching the maximum ramp — shift to your easiest gear early, not reactively. Standing out of the saddle is often necessary but burns matches quickly at 28%.
  • Cadence: Aim for 70–80 rpm on sustained steep sections rather than grinding at 50–55 rpm, which spikes muscular fatigue disproportionately.
  • The undulation penalty: Because total ascent (1,183 m) so significantly exceeds net gain (627 m), your legs are doing far more work than the headline numbers suggest. Budget energy accordingly.

Gearing Recommendations

For most riders, a compact chainset (50/34) paired with an 11-32 or 11-34 cassette is the minimum sensible setup. Riders with a standard 53/39 front ring should strongly consider swapping to a larger rear cassette before attempting the steepest ramps. At 28.27%, even well-trained climbers will spin out of usable gears on a standard setup.

If you're comparing gear ratios for this kind of gradient, the climb gearing calculator is worth running before you head out.

Summary

Stat Value
Length 11 km
Average gradient 5.72%
Maximum gradient 28.27%
Net elevation gain 627 m
Total ascent 1,183 m
Start elevation 721 m
Summit elevation 1,348 m
Category 2

The Pass of Piedrasluengas rewards patience and punishes optimism. Treat the average gradient as background context and treat the 28.27% maximum as the defining challenge. Manage those ramps with conservative early pacing, correct gearing, and a cadence strategy, and the 11 km is very rideable. Ignore them, and you'll be walking sections you should have spun through.