Otsondo
ClimbCategory 2

Otsondo

A Cat 2 climb in Spain, Otsondo covers 9.6 km with 500 m net elevation gain, an average gradient of 5.22%, and a brutal max spike of 20.77%.

Length
9.6km
Avg
5.2%
Max
20.8%
Summit
576m
Ascent
859m
Plan a route here Pre-drawn base to summit, ready to extend into your ride.

The climb

Gradient profile

594 m 87 m 0.0 km2.4 km4.8 km7.2 km9.6 km
+527 m ascent−28 m descentMax grade 15.6%

Overview

Otsondo is a Category 2 climb in Spain that earns its rating not through sheer average gradient but through the brutal gradient spikes buried within its 9.6 km length. Starting at 76 m elevation and topping out at 576 m, the climb delivers a net elevation gain of 500 m — but the total ascent figure of 859 m tells a more honest story. That gap between net gain and total ascent means the road is not a simple ramp. There are recoveries, false flats, and at least one section steep enough to spike to 20.77% — a number that demands full respect.

The average gradient of 5.22% feels manageable on paper. In practice, Otsondo is an exercise in gradient variance management, not steady-state climbing.

How the Gradient Unfolds

With an average of 5.22% across 9.6 km, you might expect a relatively predictable effort. The 859 m of total ascent versus 500 m net gain indicates significant undulation — sections that go up harder than the average, followed by brief descents or flat pitches that reset your legs temporarily before the road bites again.

The 20.77% maximum gradient is the defining feature. A pitch that steep — more than double the average — is not a ramp you power through at threshold. It is a section where forward momentum collapses without adequate gearing and well-managed pacing in the kilometers before it arrives. Treat the lower-gradient sections as controlled efforts, not opportunities to push, so you arrive at the steepest ramps with something left.

Pacing Strategy

  • Bottom section: Resist the temptation to ride at or above your FTP early. The road will demand more from you later.
  • Mid-climb undulations: Use the flatter or descending sections to recover actively — spin the legs out, lower your heart rate, and take on fluid if needed.
  • Steep ramps approaching 20.77%: Drop into your easiest gear before the gradient kicks up, not after. Surging to shift under maximum load costs power and risks mechanical stress.
  • Pacing target: Given the variable terrain, targeting 88–93% of FTP on the harder pitches and allowing yourself to drift lower on the transitions is a practical approach. If you are unsure of your current FTP, use the FTP Estimator before attempting this climb at race pace.

Gearing Notes

The 20.77% maximum gradient makes a compact or sub-compact chainset the sensible choice for most riders. On a standard double chainring setup, ensure you have at least a 32-tooth cassette sprocket available. Riders running 1x drivetrains should confirm their range covers the steepest ramps — there is no room to finesse a gear you do not have when the gradient spikes suddenly.

If you are coming to Otsondo from a flatter training background, do not underestimate how quickly a 20%+ pitch shuts down riders who arrive at it with already-depleted legs. The 9.6 km total distance is long enough that pacing errors compound.

Key Numbers at a Glance

Stat Value
Length 9.6 km
Net Elevation Gain 500 m
Total Ascent 859 m
Average Gradient 5.22%
Maximum Gradient 20.77%
Start Elevation 76 m
Summit Elevation 576 m
Category 2

The disparity between total ascent and net gain is the number to keep in mind on race day. Otsondo rewards riders who treat the full 9.6 km as a dynamic effort rather than a single sustained push.