Lünerkrinne
ClimbCategory 1

Lünerkrinne

A practical pacing and gearing guide to the Lünerkrinne cycling climb, a 17.2 km Austrian ascent averaging 5.96%.

Length
17.2km
Avg
6.0%
Max
11.6%
Summit
1,574m
Ascent
1,008m
Plan a route herePre-drawn base to summit, ready to extend into your ride.

The climb

Gradient profile

1557 m 555 m 0.0 km4.3 km8.6 km12.9 km17.2 km
+1008 m ascent−6 m descentMax grade 11.6%

Lünerkrinne cycling climb profile

The Lünerkrinne cycling climb is a category 1 ascent in Austria that asks for patience more than aggression. On paper, 17.2 km at 5.96% is not a short, explosive test. It is the kind of climb where the cost comes from duration: enough distance to expose poor pacing, enough average gradient to keep pressure on the pedals, and a maximum gradient of 11.57% to make over-gearing a real mistake.

Starting at 547 m and topping out at 1574 m, the climb gains 1027 m in net elevation. The supplied profile also lists 1008 m of total ascent, so the practical takeaway is straightforward: this is a sustained vertical effort with very little room to treat the early kilometres casually.

How the gradient rides

With an average gradient just under 6%, Lünerkrinne should ride as a controlled aerobic climb for most well-paced riders. That number matters because it points to a climb that is rarely defined by one single wall, but by the accumulation of steady climbing. The danger is not that the average gradient is extreme. The danger is that 17.2 km gives every early surge time to come back with interest.

The 11.57% maximum gradient changes the gearing and pacing equation. Even if the climb is broadly manageable, at least one section is steep enough to force a meaningful shift in cadence and torque. Riders who choose gearing only for the 5.96% average risk finding themselves grinding when the road reaches its steepest pitch.

Pacing notes

Treat the first part of the climb as a governor test. If the effort feels exciting early, it is probably too hard. A climb of this length rewards holding a sustainable tempo around your known climbing output, then reassessing later once the steepest gradients and total duration have started to show their hand. If you pace by power, anchor the ride to your /glossary/ftp rather than chasing speed, since gradient changes will make speed a poor guide.

A sensible approach is:

  • Start below threshold and keep breathing controlled
  • Shift early before the steep ramps rather than forcing cadence down
  • Stay seated whenever possible to limit muscular cost
  • Save standing efforts for the 11.57% maximum-gradient sections or brief resets
  • Only lift the effort near the top if cadence and breathing are still stable

Gearing and ride feel

Because the climb combines length with a double-digit maximum gradient, compact or climbing-friendly gearing is the safer choice for most riders. The goal is not just to survive the steepest section, but to keep torque low enough that the final kilometres do not become a strength-endurance grind.

Lünerkrinne is best ridden with discipline: settle in, respect the vertical gain, and avoid treating the average gradient as permission to press too early. The profile is demanding because it is long, steady, and steep enough in places to punish riders who arrive without a low gear or a pacing plan.

Ridden this one? Put your time against it.

Neverchill logs every climb you ride, tracks your best ascents, and shows how you compare on the ones you keep coming back to.

Create free account