Alto de Quiilahuani
ClimbCategory 1

Alto de Quiilahuani

A long Category 1 climb in PE: 52.9 km at 3.48%, rising from 1,868 m to 3,709 m with ramps up to 8.79%.

Length
52.9km
Avg
3.5%
Max
8.8%
Summit
3,709m
Ascent
1,945m
Plan a route herePre-drawn base to summit, ready to extend into your ride.

The climb

Gradient profile

3702 m 1877 m 0 km13 km26 km40 km53 km
+1945 m ascent−120 m descentMax grade 8.8%

Alto de Quiilahuani cycling climb profile

Alto de Quiilahuani is a Category 1 climb that asks for patience more than aggression. On paper, 52.9 km at an average gradient of 3.48% can look manageable, but that average is only useful if it is treated carefully. The climb rises from 1,868 m to 3,709 m, gaining 1,841 m net, with 1,945 m of total ascent. That tells you two things before you even turn a pedal: this is a long day of sustained upward pressure, and the road is not simply one clean ramp from bottom to top.

The difference between net elevation gain and total ascent suggests there are variations along the way. The average gradient is moderated across the full distance, but the maximum gradient reaches 8.79%, which is steep enough to punish anyone who paces the climb as if it will sit at 3.48% all the way to the summit.

How the gradient rides

The defining feature is duration. At 52.9 km, the climb is long enough that small pacing errors compound. A few minutes above target effort early on may not feel costly at the start elevation of 1,868 m, but the summit comes at 3,709 m, and the final part of the climb is being ridden after a large amount of accumulated work.

The low average gradient means much of the climb is likely to feel like controlled tempo rather than pure climbing survival. That can be deceptive. A rider who chases speed on the easier sections risks arriving at the steeper ramps without the ability to respond. The 8.79% maximum gradient is the number that should shape gearing and pacing, not just the average.

Pacing and gearing notes

This is a climb to ride from effort, not ego. The right strategy is to keep the opening phase below threshold and let the length do the work. If using power, anchor the day around sustainable climbing output rather than repeated surges. Riders without power should use breathing and cadence as the governor: if the cadence starts falling on moderate gradients, the effort is already too high.

Gearing should be chosen for the steepest section, not for the average. A setup that feels slightly conservative on the lower-gradient stretches will make more sense when the road reaches its harder pitches. The goal is to preserve cadence through the 8.79% ramps without being forced into a low-cadence grind.

Fueling also matters because the climb is too long to treat as a single hard effort. Start eating and drinking before it feels necessary. The combination of 52.9 km of climbing and a summit at 3,709 m makes late-climb fading a real risk if fueling is delayed.

Bottom line

Alto de Quiilahuani is not defined by brutal average steepness. It is defined by scale. The winning ride is steady, geared correctly, and emotionally restrained. Respect the distance, keep the steepest ramps in mind, and avoid turning the early manageable gradients into a debt that has to be repaid near the summit. For effort planning, it is worth knowing your sustainable output before the ride with an /tools/ftp-estimator or reviewing /glossary/ftp.

Ridden this one? Put your time against it.

NeverChill logs every climb you ride, tracks your best ascents, and shows how you compare on the ones you keep coming back to.

Create free account